Installeren Adaptive Cruise Control (ACC) Focus MK4

[M.Blaak]

Kan iemand aan de hand van de VIN herleiden of een auto geschikt is voor achteraf inbouwen van ACC?

 

[Tigershark]

Kan iemand aan de hand van de VIN herleiden of een auto geschikt is voor achteraf inbouwen van ACC?

Volgens mij kun je de asbuilt downloaden.
Helemaal onderaan in de asbuilt, .ab file openen met editor of notepad.
Dan kun je zien welke onderdelen erin zitten met nummer.

Anders wil ik dit wel voor je doen.

 

[sonoma_marc]

hier ist die benötigte vin: WF0PXXGCHPNR12937

 

[Tigershark]

Hier een foto van de abs unit die erin moet zitten zodat ACC ook fatsoenlijk werkt.
Er zijn verschillende onderdeelnummers in omloop die voor verwarring kunnen zorgen.

 

[Nathan]

Hi I've fitted all hardware but ccm is not showing in forscan any ideas any1? It's meant to be powered by ipma but not showing cheers

 

[Geert1992]

Hi I've fitted all hardware but ccm is not showing in forscan any ideas any1? It's meant to be powered by ipma but not showing cheers

What do you mean by powered by the IPMA?
Do you measure 12V at the CCM plug?
Could you maybe add some pictures?:
Canbus connection
12v connection
Screenshot Forscan

 

[Nathan]

I got a loom made by ohi chen it has block for ccm then other end has a adaptor which goes into ipma and earth on it connected it all up and ccm is not showing in forscan modules the pre made loom has 2 canbus and 2 power + - thanks

 

[FocusSTL]

When you connect to your vehicle with Forscan do not load a profile, click on NO and thereafter Forscan will initialize your vehicle and will most likely find your CCM.

 

[Nathan]

When you connect to your vehicle with Forscan do not load a profile, click on NO and thereafter Forscan will initialize your vehicle and will most likely find your CCM.

Got ccm read but as soon as car gets Infront of me it says adaptive cruise not available

 

[FocusSTL]

Got ccm read but as soon as car gets Infront of me it says adaptive cruise not available

It could be incorrect programming or the Private Can bus is incorrectly wired.

If you go to the BCM easy config and type ‘cruise’ in the search box, what is the cruise control set to?

And do you drive a manual or an automatic gearbox?

 

[Nathan]

It could be incorrect programming or the Private Can bus is incorrectly wired.

If you go to the BCM easy config and type 'cruise' in the search box, what is the cruise control set to?

And do you drive a manual or an automatic gearbox?

Hi I've got automatic it's now working on adaptive cruise but if I put it on adaptive with stop and go it throws up loads of errors to do with abs etc

 

[bws723]

Hi I've got automatic it's now working on adaptive cruise but if I put it on adaptive with stop and go it throws up loads of errors to do with abs etc

Did you tried to initialise the ABS module afterwards?

 

[FocusSTL]

Hi I've got automatic it's now working on adaptive cruise but if I put it on adaptive with stop and go it throws up loads of errors to do with abs etc

Then you haven’t set the ABS settings right.
I cannot recall which setting I made, but I belief everything was done via easy config.

 

[Nathan]

Did you try to initialize the ABS module afterwards?

No

 

[Nathan]

Then you haven't set the ABS settings right.
I cannot remember which setting I made, but I believe everything was done via easy config.

Any chance you could have a look and send it over cheers

 

[FocusSTL]

Any chance you could have a look and send it over cheers

Don’t have a Focus anymore.

 

[Nathan]

Jx61-2c219-kf this is my abs module does any1 know if this will work with adaptive stop and go

 

[FocusSTL]

I cannot tell you by P/N, but do you have park assist?

 

[Nathan]

I cannot tell you by P/N, but do you have park assist?

Hi no I don't have park assist

 

[Tigershark]

Jx61-2c219-kf this is my abs module does any1 know if this will work with adaptive stop and go

A quick search shows that your abs module is the simple version with external brake booster.
For now I would say no.